​MReX-5IO-DMR TELEMETRY and MESSAGING TRANSCEIVER

The MReX-5IO-DMR is a multi-band, very high sensitivity transceiver for the transmission and reception of DMR and POCSAG messages and also for general telemetry use.  The MReX-5IO-DMR may be provided with DMR only functionality, or additionally with POCSAG depending on licensing options.
The MReX-5I0-DMR can be directly controlled from most common DMR handheld transmitters, allowing for the simplest site control system. 

MReX-5IO-DMR Secure Messaging IO Transceiver

MReX Features:

•  Available in models supporting 137-174MHz, 421-480MHz, 863-870MHz and 902-928MHz.

• Data rates supported from 512 baud to 128kbps with frequency hopping options.
• Sends and receives 512, 1200 and 2400 baud POCSAG paging messages.
• Transmits DMR messages and receives data messages directly from most DMR radios (Hytera, Motorola, Tait, Kirisun and many others).
• Store and forward repeater operation with configurable duplicate reject (optional).
• Point-to-point wireless serial link enabling a transparent serial connection.
• Military grade AES-256 secure encrypted RF communication.
• Up to 5 inputs. 
• Two relay outputs.
• RS232 and USB-C connection interfaces.
• Configured inputs can be programmed to send POCSAG and DMR messages simultaneously when triggered.
• Configured outputs can be controlled via paging or DMR messages.  
• Periodic message support to ensure link integrity.
• Firmware upgradable.
• High stability 0.5ppm reference oscillator.
• Output power up to 100mW.
• High sensitivity receiver (-130dBm at 512 baud and -119dBm for DMR). 
• Wide range of approved channel spacings from 6.25kHz to 500kHz depending on selected frequencies and regional configuration.
• Support for many international free-to-air frequencies and optionally licensed channels.

Downloads

mrex-5io-dmr_user_manual_v1-55.pdf
File Size:	1186 kb
File Type:	pdf

Download File

---